SPU60-101,SPU60-102,SPU60-103,SPU60-104,60W 桌面電源適配器

更新時(shí)間：2023-04-22

簡(jiǎn)要描述：

Universal 90-264VAC Input
IEC-320-C14 Input Receptacle
Single Outputs from 3.3 to 48VDC
3000V Isolation
Splash Proof Case

發(fā)郵件給我們：sales1@haonpower.com

西安浩南電子科技有限公司

：
: 2511137526
：tian@haonpower.com
地址：C座30619室
：710075
：www.haonpower.com

SPU60 60 Watt Switch Mode External Power Supplies

60W Desktop Switching Power Supplies

	Universal 90-264VAC Input
	IEC-320-C14 Input Receptacle
	Single Outputs from 3.3 to 48VDC
	3000V Isolation
	Splash Proof Case

Model Number		Output Voltage	Output Amps	Total Regulation
SPU60-101		3.3V	6A	7%
SPU60-102		5V	6A	5%
SPU60-103		6V	5.8A	5%
SPU60-104		10V	4A	5%
SPU60-105		12V	4.16A	5%
SPU60-106		15V	3.66A	5%
SPU60-107		18V	3.33A	5%
SPU60-108		24V	2.5A	5%
SPU60-109		30V	2A	5%
SPU60-110		36V	1.66A	3%
SPU60-111		48V	1.25A	3%

SPU60 series

Input Specifications

Isolation	3000 VAC
Isolation Input-Ground	1500VAC
Insulation Resistance	50 Mohm min.
Efficiency	75% FL, 230Vin, typ
Safety Approvals	（c）UL60950-1, EN60950-1

Physical Specifications

Size （Inches）	4.64” x 1.36” x 2.0”
Construction	Desktop Style
Weight （g）	340g
Weight （oz）	12oz
Input Voltage Range		90-264 VAC
Frequency Range		47-63 Hz
Inrush Current		Low Line （115VAC） 15A max./High Line （230VAC） 30A max. （cold start） typ.
Input Current		Low Line （115VAC） 1.6A/High Line （230VAC） 1.0A
Leakage Current		0.75mA MAX. @ 240 VAC, FL

General Specifications

Environmental Specifications

Operating Temperature	0 to +40°C （FL）/5 Load @ 70°C
EMC	110Vin: FCC Part 15 Class B/220Vin: CISPR-22 Class B
Storage Temperature	-40 to +85°C
Working Humidity	5% to 95%, non-cond
MTBF	100,000 Hrs

Notes

NOTE: Low cost 3 Wire IEC320/C13 （Part Number ACCRD-C13） Input Power Cords are available for these products. Inquire to the Astrodyne Sales Depart.

All specifications are typical at nominal input, full load, and 25°C unless otherwise noted

Astrodyne products are not authorized or warranteed for use as critical components in life support systems, equipment used in hazardous environments, nuclear controls systems, or other mission-critical applications.

Output Specifications

Output Voltage	3.3V
Output Amps	6A
Load Regulation	± 7%, max. 230Vin
Line Regulation	± 1%, max.
Total Regulation	7%
Temperature Coefficient	±0.04%/°C, typ
Ripple and Noise	FL, 90Vin 2% Pk-Pk, max.
Over Voltage Protection	112-132%
Over Current Protection	110-15
Transient Response	100Vin, FL to 1/2L 4mS
Start Up, Rise Time	100Vin, FL 2S max.
Hold Up Time	100Vin, FL 16mS min.